Skip to main content

Command to check on Checkpoint Bond Interface status

[Expert@fw01:0]# cphaprob -a if

Required interfaces: 3
Required secured interfaces: 1

Mgmt       Disconnected          non sync(non secured), multicast
bond0      UP                    non sync(non secured), broadcast, bond Load Sharing
bond1      UP                    non sync(non secured), broadcast, bond Load Sharing
bond2      UP                    sync(secured), multicast, bond Load Sharing


[Expert@fw01:0]# cphaconf show_bond -a

                                      |Slaves     |Slaves |Slaves
Bond name  |Mode               |State |configured |in use |required
-----------+-------------------+------+-----------+-------+--------
bond0      | Load Sharing      | UP   | 2         | 2     | 1
bond1      | Load Sharing      | UP   | 2         | 2     | 1
bond2      | Load Sharing      | UP   | 1         | 1     | 0

Legend:
-------
UP!               - Bond interface state is UP, yet attention is required
Slaves configured - number of slave interfaces configured on the bond
Slaves in use     - number of operational slaves
Slaves required   - minimal number of operational slaves required for bond to be UP

[Expert@fw01:0]# cphaconf show_bond bond0

Bond name:      bond0
Bond mode:      Load Sharing
Bond status:    UP
Balancing mode: 802.3ad Layer3+4 Load Balancing
Configured slave interfaces: 2
In use slave interfaces:     2
Required slave interfaces:   1

Slave name      | Status          | Link
----------------+-----------------+-------
eth3-03         | Active          | Yes
eth3-01         | Active          | Yes

[Expert@fw01:0]# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.2.4 (January 28, 2008)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 200
Down Delay (ms): 200

802.3ad info
LACP rate: slow
Active Aggregator Info:
        Aggregator ID: 1
        Number of ports: 2
        Actor Key: 33
        Partner Key: 1
        Partner Mac Address: 00:35:1a:d9:33:00

Slave Interface: eth3-03
MII Status: up
Link Failure Count: 1
Permanent HW addr: 00:1c:7f:61:90:50
Aggregator ID: 1

Slave Interface: eth3-01
MII Status: up
Link Failure Count: 1
Permanent HW addr: 00:1c:7f:61:90:4e
Aggregator ID: 1


Comments

Post a Comment

Popular posts from this blog

Install Google Playstore on Pendo Pad 4.0 and rooting the device.

Coles selling the Pendo 7" Android Pad running Ice Cream Sandwich 4.03, however by default it does not come with Google Play Store. Rather it has the China "store" GetJar, which only have limited Apps available. In order to get the  Google Play store install on device. Firstly you have to root the device to gain root access. 1. Download unlockroot from : www.unlockroot.com/ 2. Connect the device to a windows PC, install and run the program. Make sure window machine has the necessary driver to access android pad.  If device driver is not available. Download and install the driver from: http://developer.android.com/tools/extras/oem-usb.html Make sure set the android device to USB Debugging mode to allow the unlockroot to root the device: Enable the USB debugging mode from : Setting -> Developer Options -> USB debugging Click on Root to root the device. After that, install the google play store by downloading it and transfer it to...
17 comments
Read more

Linux command to install software for various Distro

Ubuntu (*buntu, Mint linux) Apt-get install apt-get update apt-get remove apt-get dist-upgrade apt-get purge Fedora/RHEL/CentOS yum install yum update yum remove Opensuse yast2 --install yast2 --remove zypper update Freebsd  pkg_add pkg_delete Gentoo emerge package # Install emerge -C package # Remove a package emerge -s keyword # Search for packages (package names only) emerge -u package # update the package Arch pacman -U package.pkg.tar.xz # Local package install pacman -Syy # Refresh package databases pacman -Syu # Update installed packages pacman -S package # Install package pacman -R package # Remove package
3 comments
Read more